Ghost Car Immobiliser
Ghost is an anti-theft system of the modern generation that blocks your vehicle from starting if you do not connect the sequence pin. It is completely invisible and utilizes the CAN data networks.
It can be set to an individual pin code that can be used to access buttons on the steering wheel and centre console as well as door panels. This makes it highly efficient against modern methods of theft, such as key replication and relay vehicle hacking.
Easy to install
The Ghost immobiliser is a cutting-edge security tool protects your vehicle from hacking and key cloning. It can also prevent key theft. It is discreet, unnoticeable to thieves, and TASSA certified (a third-party group of security and police experts). This makes it one of the most reliable devices available.
The ghost system is connected to the CAN bus in your vehicle, an electronic control units (ECUs), which controls the engine, transmission and brakes. The system blocks the vehicle's ignition when a unique PIN sequence is entered. The PIN code is programmed using buttons on the steering wheel, center console or door panels. The sequence could be as long as 20 presses, making it difficult for thieves to determine a valid code.
Unfortunately, a few determined criminals are finding ways to get around these sophisticated security systems. One way to do this is by blocking or spoofing the signals between the ECU and Ghost Immobiliser. The other way is to connect to the CAN bus and send malicious commands to the ECU of the vehicle. These commands can disable the vehicle or render it unusable. Fortunately, you can work to keep your car safe by installing additional security measures, such as an alarm system or GPS tracker.
Ghost immobilisers are an ideal addition to your other security measures. It can be easily and quickly installed without the requirement for additional equipment or visible components that could alert thieves to its presence. The device can be hidden under your dashboard or behind the steering wheels which makes it difficult for thieves to steal it. It's silent and can't be detected by radio frequencies.
You should only install your ghost immobiliser using an approved installer such as Thatcham or Autowatch. These are professionals who know their vehicles inside and out. They know where to hide the device to ensure it is hidden from prying eyes. It is also recommended to use a tracker that is approved by Thatcham and a dash camera with your ghost immobiliser for the most secure protection.
There aren't any keyfobs or LEDs or other indicators to help you find it.
It's becoming more difficult to secure your valuable possessions from vehicle thieves. Ghost Immobiliser manufacturers have developed technology that is unnoticeable by thieves. This anti-theft system, which is at the forefront of technology, safeguards your car from key cloning or hacking. It could even stop theft. It communicates with ECU via CAN data circuits, and is completely inaccessible to any scanning technology that uses RF or code capture.
The device is totally unnoticed by car thieves as it doesn't have radio signals or LED indicators. It makes use of buttons on your car, such as the dashboard or steering wheel to create a unique code that must be entered to start the car. It can be modified at any time and gives you full control over your security. It will also prevent thieves from creating new key fobs, or even replacing the ECU. This will stop them from taking away with your vehicle.
The device is also able to detect signal relay attacks to stop theft. These are when thieves amplify the signal of your existing key fob to get around an immobiliser. The Ghost system can detect this and disable the key fob to stop thieves from starting your car.
You can also utilize the Ghost app on your phone to access a service mode, which lets you start your car without your pin. This is an excellent option for those who want to take your car to a garage for maintenance or valet parking. In addition the app will inform you if your vehicle has been removed from its original place.
As you can see, there are many reasons to consider an immobiliser that is ghostly. It is easy to use, discrete and guards you against a myriad of dangers. It is TASSA verified, which means that it has passed the stringent tests conducted by an independent organization. Choose a reputable, TASSA verified provider if you're thinking of installing a Ghost immobiliser. This will guarantee that the installer is qualified and trained and will work in conjunction with your vehicle's interface to provide the most effective security.
Your car will not be permanently damaged
The Ghost immobiliser is hidden behind the dashboard or beneath the steering wheel. This means that thieves won't be able to be able to see it, let alone detect it. This is a huge advantage over immobilisers that can be seen and easily beaten by jamming or signal cloning devices. This is particularly beneficial for owners of luxury vehicles who wish to preserve their vehicle's appearance and performance while adding an additional layer of security.
Additionally to that, the Ghost CAN Bus immobiliser uses buttons on the steering wheel, centre console or door panels to generate a unique pin code that needs to be entered prior to driving your vehicle. The pin code is similar to a credit card, and can be configured to accommodate up to 20 characters. This makes it even harder for criminals to duplicate or hack the system, and ensures that only you have access to your vehicle.
It is important to hire an expert installer when installing an immobiliser ghost. This will ensure that the device is properly installed and won't cause any damage to your vehicle. A professional can assist you troubleshoot problems with your car and offer suggestions on how to fix them.
ghost immobiliser and tracker is recommended to disconnect the battery prior to beginning the installation process. This will prevent problems with the electrical system and accidental airbag deployment. It is essential to label and label the CAN H wires and CAN L wiring, as the wrong identification could cause system malfunctions or improper installation. After identifying the power source and grounding point, it is recommended to insulate these connections using insulation tubing or heat-shrink to avoid short circuits. It is also a good idea to test the immobiliser following installation to make sure it's working as you intended.
The Ghost Immobiliser can be a effective tool to combat vehicle theft. However, it is not 100% secure. Thieves are constantly devising new tactics to bypass security systems, so it is crucial to use it in conjunction with other advanced security measures and be vigilant. By following these tips you can drastically reduce the chance of your vehicle being stolen, and feel secure regardless of where you choose to park.
TASSA verified
As thieves have become more sophisticated in recent times, many car owners are taking extra security measures to protect their vehicles. One of these security measures is installing an immobiliser ghost that is designed to stop vehicles being stolen through key-cloning or hacking. However, savvy thieves are always trying to get around these security devices.
To counter this, a new generation of immobilisers have been developed by companies like Autowatch. These new devices are TASSA certified, which means that they have been independently tested by third-party experts to make sure that the device is incredibly reliable. This confirms that the device will stop even the most skilled thieves.
The device itself is discrete, undetectable to a thief and works by connecting directly with the buttons on your vehicle. This lets you set a unique PIN code sequence that has to be entered by pressing the buttons on your steering wheel or the centre console to begin or drive the vehicle. The system is quiet and only works when the PIN code has been entered correctly. The device doesn't emit radio frequencies and is therefore not detectable by traditional detection methods, like radar guns or scanners.
Additionally In addition, the Ghost II is a Thatcham approved device which means that it is recognized by insurance companies as a further security measure and could reduce your premium based on the conditions of the insurer. This makes it the most reliable and efficient immobiliser available.
The TASSA certification also guarantees that any company you hire to install your device will be fully qualified to install the device, so you can rest assured knowing you are getting the highest quality service and installation. This is important if you wish for your insurer to recognize the ghost, as it could prove very beneficial in the event of your vehicle being stolen.